VICTOR 10 Non-contact AC Voltage Detector meter LCD Display NCV
Sensitivity Alarm Electric Circuit Breaker Finder Pencil Tester
How to find a breakpoint:
1. Connect one of the wires in the cable to the live wire, and
connect the other wires to zero or ground to form a loop.
2. Turn on the test pencil and measure from the cable to the live
line in the opposite direction.
3. When the normal cable is measured, the battery indicator lights
up red and beeps. When the indicator light of the test pen goes out
and there is no sound, this position is the breakpoint position.
Live Wire Testing:
Connect the sensing end of the test pen to the object to be tested.
If the analog bar is within 6 grids, the slow rhythm buzzer will
alarm and the display will be green and backlit.indicating that the
test is a LIVE WIRE.
Null Wire Testing:
Put the test pen test head close to the object to be tested, such
as the analog bar, the fast-paced buzzer alarm, the display is
bright red backlight,indicating that the tested line is Null Wire.
Features:
Automatic shutdown
Large Range Measuring
For testing AC Voltage
Recognition of Live/Null Wire
Triple alarm of sound, light and screen
Energy-saving and bright LCD screen
High and Low Voltage Signal Indicator
Buzzer alarm - loud and sensitive
White LED lighting - - energy saving, convenient
Auto power off
Switch key
Good Sensitivity of NCV Sensor
Technical Specifications:
1.AC Voltage: 12V-1000V
2.Frequency: 50Hz / 60Hz
3.Alarm Mode: Sound and light alarm
4.Electric Torch: LED illumination
5.Low-voltage indicator lamp: Yes
6.Power Source: 2 x 1.5V AAA Batteries(not included)
7.Security Level: CE CAT. III 1000V / CAT. IV 600V
8.Service Temperature: 0-40℃
9.Storage Temperature: -10-50℃
10.Altitude: <2000m
